VME-IMC5
Intelligent
Motion Controller for 5 Axes
|
 |
intelligence
on board makes the controlling fast an relieves
the VMEbus |
|
standardized
control of machines according to DIN 66025 |
|
5 axes
using intelligent motion controller LM628 or LM629
with 314µs cycle time |
|
all
axes can be synchronized |
|
10
digital inputs, 24 V, optocoupled |
|
5
incremental encoder inputs, optocoupled |
|
5
digital outputs 24 V / 1 A |
|
5 analog outputs ±10 V, 12 bits resolution, for servo amplifier interfaces |
|
CPU 68000
with SRAM, Flash EPROM and serial interface |
|
VMEbus compatibility: IEEE 1014 rev. C.1 |
|
VMEbus access:
SADO32, SD16 |
| |
| Download
complete data sheet (PDF-File)
|
| |
| |
| Not
recommended for new designs!
|
|
|
|
|
|
| Designation
|
|
Order
no.
|
| VME-IMC5.3-628 |
Motion
controller for 5 axes, 12 MHz, 5x LM628, I/Os +5 V, 64 kbytes SRAM |
V.1803.05
|
| VME-IMC5.3-628 |
Motion
controller for 5 axes, 12 MHz, 5x LM628, I/Os +24 V, 64 kbytes SRAM |
V.1803.24
|
| VME-IMC5.3-629 |
Motion
controller for 5 axes, 12 MHz, 5x LM629, I/Os +5 V, 64 kbytes SRAM |
V.1804.05
|
| VME-IMC5.3-629 |
Motion
controller for 5 axes, 12 MHz, 5x LM629, I/Os +24 V, 64 kbytes SRAM |
V.1804.24
|
| VME-IMC5-16MHz |
Option:
68000 CPU for 16 MHz instead of 12 MHz |
V.1805.08
|
| VME-IMC5-RAM256 |
Option:
Memory extension to 256 kbytes SRAM |
V.1805.02
|
| VME-IMC5-RAM1M |
Option:
Memory extension to 1 Mbyte SRAM |
V.1805.04
|
| VME-IMC5-NC |
Software
module (DIN 66025) |
P.1805.10
|
| VME-IMC5-OS9 |
C
driver for OS-9 as source code |
P.1805.50
|
| VME-IMC5-VxW |
C
driver for VxWorks as source code |
P.1805.56
|
| VME-IMC5.2-MD |
Manual
German
(not available as PDF-file at the moment ) |
M.1805.20 |
| VME-IMC5.3-MD |
Manual
German
(not available as PDF-file at the moment ) |
M.1805.22 |
| VME-IMC5.2-ME |
Manual
English
(not available at the moment) |
M.1805.21 |
| VME-IMC5.3-ME |
Manual
English
(not available as PDF-file at the moment) |
M.1805.23 |
|