|
 |
 |
 |
Product News
Download Paper |
CAN-CBX-CPU5201
Powerful Realtime Controller in a Smart Format
|
 |
PowerPCTM MPC5121 with FPU,
400 MHz |
 |
0.5 GB SDRAM, 1GB NAND-Flash
|
 |
100BASE-TX Ethernet |
 |
2x CAN, 1x USB 2.0 Full-Speed Host
|
 |
Profibus-DP slave (as option)
|
 |
EtherCAT-Master (as
option) |
| |
|
| |
|
Download Paper |
OTC-570
Operator Touch Controller
|
 |
5.7" TFT-Display with VGA
resolution |
 |
resistive touch screen
|
 |
ARM926 based micro controller,
200 MHz |
 |
CAN, ISO 11898-1, electrically isolated
|
 |
10BASE-T/100BASE-TX Ethernet
|
 |
Power over
Ethernet (PoE)-option |
 |
2x full-speed USB 2.0 Host |
 |
EtherCAT-Slave (option) |
Download Paper |
PMC-CAN/400-4
4x CAN with ARINC Protocol + IRIG-B
|
 |
4x CAN ISO 11898 |
 |
ARINC 825 protocol available |
 |
IRIG-B input |
 |
33/66 MHz
PCI Interface
|
 |
conduction cooled version available |
|
VME-PMC-CPU/2
Intelligent VME-Carrier Board for PMC Modules
|
 |
VMEbus master or slave
functionality, 4-level arbiter |
 |
address/data up to A64/D64 |
 |
CPU Freescale MPC 8349 |
 |
2x Gbit
Ethernet, 2x USB 2.0
|
 |
two single size PMC slots according
to
IEEE P1386/draft 2.0 |
 |
PCI 64 bit
at 66 MHz, 3.3 V only |
 |
I/O routing
according to Vita 35 (P4V2-64ac, P4V2-46dz)
|
 |
PPMC
according to
Vita 32 |
 |
one XMC according to Vita 42.3 |
Download Paper |
CAN-EtherCAT
EtherCAT / CAN Gateway
|
|
 |
fast
and reliable linking EtherCAT and CAN |
 |
gateway operates as an
EtherCAT slave with a maximum of 8 Kbytes input or output data on
the EtherCAT bus |
 |
CANopen
functionality as master or slave device |
 |
no
limitation in the number of CAN nodes |
 |
CAN high speed interface
(ISO 11898-2) |
 |
100BaseTX
EtherCAT interface
|
|
|
|
|
|
|
Download Paper |
EtherCAT
Master Stack
EtherCAT Master
Stack for Embedded (Real Time) Operating Systems
|
|
 |
configuration
and management of EtherCAT networks |
 |
cyclic
exchange of process data |
 |
support for event based
mail
box communication with the protocols:
- CANopen over EtherCAT (CoE)
- Ethernet over EtherCAT (EoE)
- File over EtherCAT (FoE) |
 |
easy to use API common
to all implementations as interface between the application and the
EtherCAT master stack |
 |
supports
EtherCAT via UDP communication |
 |
built-in
network and protocol diagnostic functions |
 |
available for various
operating systems |
Download Paper |
CAN-PN
PROFINET-IO / CAN Gateway
|
|
 |
fast
and reliable linking PROFINET IO and CAN with data buffering |
 |
CAN-PLC link
e.g. to SIEMENS SIMATIC-S7-300 or S7-400 |
 |
interfacing
CANopen modules (CiA DS-301) or CAN layer-2 (ISO11898-1) |
 |
gateway
operates as a PROFINET IO device with a maximum of 256 bytes input
data and 256 bytes output data on the PROFINET bus |
 |
CAN high speed interface
(ISO 11898-2)
|
 |
100BaseTX
PROFINET interface |
|
|
|
|
|
|
|
|
Download Paper |
CAN-AIR/2
Wireless
CAN-Bridge
|
 |
wireless
radio communication of separated CAN nets |
 |
ISM-band (2.4 GHz)
|
 |
linking of
CAN nets with different bitrates
|
 |
CAN-telegram filtering
|
 |
configuration
via USB interface
|
 |
CAN high speed interface
(ISO 11898-2)
|
|
|
|
Download Paper |
PMC-CPU/440
PowerPC PrPMC
Module with Gigabit Ethernet, USB and CAN
|
 |
PowerPC AMCC
PPC440EPx, 533/667 MHz, 32 bit |
 |
2x 1000 BaseT Ethernet |
 |
2x ... 4x CAN
interface |
 |
USB 2.0 |
 |
2x RS-232 |
 |
IRIG-B100 time code
interface |
 |
Linux, VxWorks,
QNX and OS9 supported, others on request |
Download Paper |
CAN-USB/2
USB-CAN-Interface for
USB 2.0
|
 |
USB 2.0 High Speed interface with data rates of 480
Mbit/s |
 |
CAN interface acc. to
ISO 11898-2, electrically isolation, 1 Mbit/s |
 |
power supply by USB |
 |
microcontroller ARM
LPC2292 |
 |
aluminium case 55 mm x 55 mm x 25 mm |
Download Paper |
DN-DP
Profibus-DP /
DeviceNet-Gateway
|
 |
fast
and reliable linking any PROFIBUS-DP master to DeviceNet with data
buffering |
 |
application
examples: DeviceNet-PLC link, e.g. to SIMATIC-S7-300 or S7-400 |
 |
DP-slave
with a total maximum of 244 bytes input and 244 bytes output
data |
 |
on board
DeviceNet scanner or slave
|
 |
configuration via the
configuration tool of the PROFIBUS-DP master
|
|  |
|